💥 1941 Global Command Decision - Official Thread

wc_sumpton

Unit Support:
I would use a commonality to support. i.e. Instead of 'Command-Air', 'Command-Fleet', just use 'Command', this way when two HQ units are together, their support is more spread out, unless of course the idea is for some unit to receive compounded support while other may receive none.

Also breakdown offensive/defensive support. Artillery should just give offensive support. Armor units on the other hand should only give defensive support. When attacking, armor units are in front or infantry, clearing the way, not behind.
There should be two types of fighters, air superiority (Fighter, P 51 Mustang, Fighter Jet) and ground support (bomber-lgt). The bomber-lgt should be able to support attacking tanks at 1:1, but its 'Dog Fight' airAttack, airDefense should be at the very weakest, 1s across the board.
Bombers (Bomber, Nuclear-Bomber) should have some type of airAttack. This is the value used during SBR, when the units is intercepted, and no airDefense (I would never use a bomber to intercept). And maybe even some offensive 'Dog Fight' capabilities, or AAstrength, offensive support 1:1 to air superiority units.

TheDog

@wc_sumpton
HQ Command
Thanks for the 'Command' heads up, all HQs now just have
bonusType" value="Command"
eg. As German HQ-Submarine and Italian HQ-Fleet could combine and give +2, thats not intended.

airAttack/airDefence
The PoS2 is not clear. So be be clear for Bombers I should have ?
<option name="airAttack" value="1"/>
<option name="airDefense" value="0"/>

For escorting fighters of bombers ?
<option name="airAttack" value="2"/>

For scrambled intercepting Fighters
<option name="airDefense" value="3"/>

For Fighters, combining the above ?
<option name="airAttack" value="2"/>
<option name="airDefense" value="3"/>

Conscript/Kamikaze to be produced when home nation/waters is invaded is a good idea, on the TODO list.

The Inf-Gunner, is a bit like the controversial Bunker and Im also reluctant to add another unit type.

The rest I will cogitate on.

wc_sumpton

@thedog

airAttack is for the Attacker, the one preforming the SBR, and those units designated as Escorting the attacking bomber.

airDefense is for the Intercepting units defending against the SBR attack.

So the bombers, which are preforming an attack, and those units Escorting, should have airAttack value set. Units that can Intercept should have there airDefence set.

TheDog

Latest version 80 ready for download from 1st page 1st post

Major Changes

Fighter-Early, Fighter, Fighter-Jet, P51-Mustang all -1 Atk air combat & 1pu cheaper, making these units 'defence' for the AI
Bomber-Lgt now 2/1 & Targeted 1/1 v ground/surface, 1pu cheaper, making these units 'attack' for the AI
Air-Transport 7pu, was 6, reduces the probability of the AI buying them
Submarine 6pu, was 8, Submarine-Adv 7pu, was 9, as Bomber-Lgt can now target subs
Free German Subs in the Atlantic now 1 in 10 per SZ per Factory, was 1 in 16, as Bomber-Lgt can now target subs
Many nations reduced their Bunkers to 1, so their upkeep is less give the players more freedom to purchase units (thanks Jason)
Anti-Air unit now 1/2 was 1/1, so better value for pu
HQs Command now as intended (thanks WC Sumpton)
airAttack/airDefence corrected (thanks WC Sumpton)
Germany/Italy tertory PU now matches their factory (thanks Black Elk)

WEST

Germany & USSR get extra units in Warsaw & Kazan (Air-Transport, Infantry-Elite) (thanks Black Elk)
Germany every 4th turn gets a free HQ-Submarine but has to escape mainland europe
USSR fleets changed, new Baltic Fleet (thanks Jason)
Terrain changes Marsh: Florida, Louisiana
Forest: Oregon
Desert: Nevada and New Mexico, Baja-Sonora, Chihuahua-Durango
Mountains: Colorado, Mexico City (all Black Elk)

EAST

Swapped Factories for Brisbane & Sydney, later Industry-Hvy is now for Sydney
Pacific Allies (Dutch East Indies) get 4 more units, 2 Bunkers/Garrison, Inf-Trained & a Destroyer (thanks Jason)
Removed Inf-Motorized from Japan & Pacific-Allies Purchase screens, as both nations did not really use them, like in the west

TODO

Balance
Conscript/Kamikaze to be produced when home nation/waters is invaded (thanks WC Sumpton)
Terrain effect icons for each TT (This might get done as skin or not at all)

wc_sumpton

@thedog, @Black_Elk

A different way to do 'Tech Research':
First use just 1 '_production', for Britian:

<!-- Britain -->
<productionFrontier name="production_Britain">
	<frontierRules name="buyHQ-Army"/>
	<frontierRules name="buyHQ-Fleet"/>
	<frontierRules name="buyHQ-Air"/>

	<frontierRules name="buyInf-Trained"/>
	<frontierRules name="buyInf-Elite"/>
	<frontierRules name="buyInf-Motorized"/>
	<frontierRules name="buyArmor-Lgt"/>
	<frontierRules name="buyArmor-Med"/>

	<frontierRules name="buyArtillery"/>
	<frontierRules name="buyAnti-Tank"/>
	<frontierRules name="buyAnti-Air"/>
	<frontierRules name="buyBunker"/>

	<frontierRules name="buyDestroyer"/>
	<frontierRules name="buyCruiser"/>
	<frontierRules name="buyBattleship"/>
	<frontierRules name="buyCarrier"/>
	<frontierRules name="buySubmarine"/>
	<frontierRules name="buyTransport"/>

	<frontierRules name="buyFighter"/>
	<frontierRules name="buyBomber-Lgt"/>
	<frontierRules name="buyBomber"/>
	<frontierRules name="buyAir-Transport"/>

	<frontierRules name="buyIndustry-Hvy"/>
	<frontierRules name="buyIndustry-Med"/>
	<frontierRules name="buyIndustry-Lgt"/>
	<frontierRules name="buyBase-Camp"/>
</productionFrontier>

Now for the Carrier-Fleet:
Edit Changed on 4/29 to place 'invert' option in its own condition

<!-- Britain Carrier-Fleet -->
<!-- Has the research been successful -->
<attachment name="conditionAttachment_Britain_Research_Carrier-Fleet_Success" attachTo="Britain" javaClass="RulesAttachment" type="player">
	<option name="switch" value="false"/>
</attachment>
<!-- Invert in setting rounds condition is not working so a separate condition is used --> 
<attachment name="conditionAttachment_Britain_Research_Carrier-Fleet_Invert" attachTo="Britain" javaClass="RulesAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Britain_Research_Carrier-Fleet_Success"/>
	<option name="invert" value="true"/> <!-- need to check the inverted condition -->
</attachment>
<!-- Without successful research, setup when to begin -->
<attachment name="conditionAttachment_Britain_Research_Carrier-Fleet" attachTo="Britain" javaClass="RulesAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Britain_Research_Carrier-Fleet_Invert"/>
        <!-- Research begins on round 10, and continues untill successful -->
	<option name="rounds" value="10-+"/>
</attachment>

<!-- Using chance to research -->
<attachment name="triggerAttachment_Britain_Research_Carrier-Fleet_Chance" attachTo="Britain" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Britain_Research_Carrier-Fleet"/>
	<option name="chance" value="1:4"/> <!-- Acts like a Tech roll -->
	<option name="chanceIncrementOnFailure" value="1"/> <!-- Increasing chance on next turn -->
        <!-- If successful change success switch to true -->
	<option name="playerAttachmentName" value="RulesAttachment" count="conditionAttachment_Britain_Research_Carrier-Fleet_Success"/>
	<option name="playerProperty" value="switch" count="true"/>       
	<option name="when" value="before:BritainCombatMove"/>
</attachment>

<attachment name="triggerAttachment_Britain_Research_Carrier-Fleet" attachTo="Britain" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Britain_Research_Carrier-Fleet_Success"/>
	<option name="productionRule" value="production_Britain:buyCarrier-Fleet"/>
	<!-- Remove replace unit now, or create another chance condition starting at turn 14 -->
	<!-- <option name="productionRule" value="production_Britain:-buyCarrier"/> -->
	<option name="notification" value="Notify_Britain_Research_1944_2Q"/>
	<option name="players" value="$All-Players$"/>
	<option name="uses" value ="1"/> <!-- only do this once -->
	<option name="when" value="before:BritainPurchase"/>
</attachment>

The same can be done for the Fighter-Jet:
Edit Changed on 4/29 to place 'invert' option in its own condition

<!-- Britain Fighter-Jet -->
<attachment name="conditionAttachment_Britain_Research_Fighter-Jet_Success" attachTo="Britain" javaClass="RulesAttachment" type="player">
	<option name="switch" value="false"/>
</attachment>
<attachment name="conditionAttachment_Britain_Research_Fighter-Jet_Invert" attachTo="Britain" javaClass="RulesAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Britain_Research_Fighter-Jet_Success"/>
        <option name="invert" value="true"/>
</attachment>
<attachment name="conditionAttachment_Britain_Research_Fighter-Jet" attachTo="Britain" javaClass="RulesAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Britain_Research_Fighter-Jet_Invert"/>
        <option name="invert" value="true"/>
	<option name="rounds" value="11-+"/>
</attachment>
<attachment name="triggerAttachment_Britain_Research_Fighter-Jet_Chance" attachTo="Britain" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Britain_Research_Fighter-Jet"/>
	<option name="chance" value="1:4"/> <!-- Acts like a Tech roll -->
	<option name="chanceIncrementOnFailure" value="1"/> <!-- Increasing chance on next turn -->
	<option name="playerAttachmentName" value="RulesAttachment" count="conditionAttachment_Britain_Research_Fighter-Jet_Success"/>
	<option name="playerProperty" value="switch" count="true"/>       
	<option name="when" value="before:BritainCombatMove"/>
</attachment>
<attachment name="triggerAttachment_Britain_Research_Fighter-Jet" attachTo="Britain" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Britain_Research_Fighter-Jet_Success"/>
	<!-- <option name="productionRule" value="production_Britain:buyFighter-Jet"/> Removed because of conflict with Pacific-Allies -->
	<option name="notification" value="Notify_Britain_Research_1944_3Q"/>
	<option name="players" value="$All-Players$"/>
	<option name="uses" value ="1"/> <!-- only do this once -->
	<option name="when" value="before:BritainPurchase"/>
</attachment>
<!-- Add Fighter-Jet before British Production -->
<attachment name="triggerAttachment_Britain_Add_Fighter_Jet" attachTo="Britain" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Britain_Research_Fighter_Jet_Success"/>
	<option name="productionRule" value="production_Britain:buyFighter-Jet"/>
	<option name="when" value="before:BritainPurchase"/>
</attachment>
<!-- Now remove Fighter-Jet prior to Pacific-Allies procuction -->
<attachment name="triggerAttachment_Britain_Remove_Fighter_Jet" attachTo="Britain" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Britain_Research_Fighter_Jet_Success"/>
	<option name="productionRule" value="production_Britain:-buyFighter-Jet"/>
	<option name="when" value="before:Pacific-AlliesPurchase"/>
</attachment>

Britian only has these two updates, but more could be added.

Cheers...

TheDog

lol, more will be added

I had started to attempt to put the code together for Conscripts, it was not working, but you have given me so much more. :thumbs_up:

And it even has random turns for tech.

Jason Green-Lowe

@thedog Sounds good to me! Looking forward to giving it another try, although it might be a while; juggling lots of projects right now.

TheDog

As and when, we are just happy for the feedback and engagement to make it better.

wc_sumpton

@thedog, @Black_Elk

If I'm reading it correctly, the Pacific-Allies receive the British Production with the Carrier-Fleet, but not the Fighter-Jet:

<attachment name="triggerAttachment_Britain_Research_Fighter-Jet" attachTo="Britain" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Britain_Research_Fighter-Jet_Success"/>
	<!-- <option name="productionRule" value="production_Britain:buyFighter-Jet"/> -- Need to remove this line -->
	<option name="notification" value="Notify_Britain_Research_1944_3Q"/>
	<option name="players" value="$All-Players$"/>
	<option name="uses" value ="1"/> <!-- only do this once -->
	<option name="when" value="before:BritainPurchase"/>
</attachment>
<!-- New attachments to add/remove Fighter-Jet -->
<!-- Add before British Production -->
<attachment name="triggerAttachment_Britain_Add_Fighter-Jet" attachTo="Britain" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Britain_Research_Fighter-Jet_Success"/>
	<option name="productionRule" value="production_Britain:buyFighter-Jet"/>
	<option name="when" value="before:BritainPurchase"/>
</attachment>
<!-- Now remove Fighter-Jet prior to Pacific-Allies procuction -->
<attachment name="triggerAttachment_Britain_Remove_Fighter-Jet" attachTo="Britain" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Britain_Research_Fighter-Jet_Success"/>
	<option name="productionRule" value="production_Britain:-buyFighter-Jet"/>
	<option name="when" value="before:Pacific-AlliesPurchase"/>
</attachment>

Will talk about the German's V-2 rocket, and Japan's Kamikaze-Plane later.

Cheers...

TheDog

Correct.
Not historically correct, if not, they are bit mundane.

wc_sumpton

@thedog, @Black_Elk

The German's V-2 rocket can only be started after the completion of the V-1 (I would split up the V-1 and me262):

<attachment name="conditionAttachment_German_Research_V-2_Success" attachTo="Germany" javaClass="RulesAttachment" type="player">
	<option name="switch" value="true"/> <!-- This time leave this switch 'true' -->
</attachment>
<!-- Do not need a when to start condition, V-2 starts after V-1 completion -->

<attachment name="triggerAttachment_German_Research_V-2_Chance" attachTo="Germany" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_German_Research_V-1_Success"/> <!-- Tells when V-1 completed -->
	<option name="conditions" value="conditionAttachment_German_Research_V-2_Success"/>
	<option name="chance" value="1:4"/> <!-- Acts like a Tech roll -->
	<option name="chanceIncrementOnFailure" value="1"/> <!-- Increasing chance on next turn -->
	<option name="playerAttachmentName" value="RulesAttachment" count="conditionAttachment_German_Research_V-2_Success"/>
	<option name="playerProperty" value="switch" count="false"/> <!-- was left a true, now change to false -->
	<option name="when" value="before:GermanCombatMove"/>
</attachment>

<attachment name="triggerAttachment_German_Research_V-2" attachTo="Germany" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_German_Research_V-2_Success"/>
        <option name="invert" value="true"/> <!-- change the switch about so check for the inverse -->
	<option name="productionRule" value="production_German:buyV-2"/>
	<option name="notification" value="Notify_Germany_Research_1944_4Q"/>
	<option name="players" value="$All-Players$"/>
	<option name="uses" value ="1"/> <!-- only do this once -->
	<option name="when" value="beforeGermanPurchase"/>
</attachment>

So this will set the V-2 to only begin after the V-1 completion.

Cheers...

Black_Elk

I'm on board with all these suggestions

I was running experiments for the relief. Right now it's around 90mb when I reconstruct from the reliefTiles folder. If I desaturate the ocean sea zones and reduce their opacity I can get this down to just shy of 70mb. This would allow the player a bit more control over the color blue that displays in-game by modifying the blue in the baseline, while still preserving the basic blue-ish/white glow effect of the border. Looks like this with the current default baseTile colors...

If I desaturate the entire image the relief would then be down to about 35mb. This would allow the player to change the ocean to any color (doesn't necessarily need to be a blue) but will also show land more evenly colored over. A little washed out basically, since only the color-value information would come through from the under terrain. It's more pastel compared to the current cause the vibrancy is only coming from the national hex. Essentially color there would be more true to the assigned national Hexes, since the only thing that's really changing within the relief is the value (brightness/darkness) within that defined color range. The difference is subtle, but still noticeable for me. It will adjust how the national hues present in some spots, particularly for Germany, which becomes more of a uniform gray. Looks like this...

Basically in both of those what I did was to make the sea zone tiles a midtone gray, and then put that portion of the relief at 60% opacity, so 40% of whatever the base color is will show through. The user can then control the exact hue of the ocean by just paintbucketing a chosen color into the baseline image, running it through the baseTiles breaker, and then the relief would show that color/color range. Gives the user a way to tweak the ocean color on the fly that way. Not as easy as changing Hex colors for the national ownership on land in the map.props, but gives at least some flexibility. All I lost in the process was the lighthouse beacon color really, cause those went ghost, though I could add those back in pretty easily. Like just pasting the graphic over again I guess. Probably only a few kb for that. For me the full bw is a bit too slate, so I think it's kinda worth the extra 30mb for just a hint of the color there, but for people who like a pastel that's pretty easy. Like just make it grayscale and running it back through hehe. Mostly it's the color information in the land/ocean relief that takes up the most space, and the blue is about a third of that or more, so got a pretty good savings just from that.

Anyhow, just thought I'd share real quick in case that idea seems cool for a space saver. Not sure which people prefer. I'm pretty used to running the relief tilebreaker in the map creator tools, but might not be super intuitive. Still if players like to customize and change colors around, I still think would be nice to have some way for the end user to modify the blue. Just cause it's the only thing that can't be quickly tweaked by assigning new Hexes in the map.properties.

https://www.dropbox.com/s/s6zqwaraslute38/relief_map_sz_bw.png?dl=0

https://www.dropbox.com/s/o5iqtfbd57r8w83/relief_map_full_bw.png?dl=0

wc_sumpton

@TheDog, @black_elk

Japan's Kamikaze-Plane, like the Inf-Conscripted, are units designed to give a losing player a chance to swing the game. Kamikaze-Planes should only be developed/deployed when an invading fleet remains within The Empire's territorial waters after Japan's combat phase. Fleet size could be 7 or more surface warships, and territorial waters are the zones Japan owns at the start of the game.

<!-- Check for invading fleet, 7 surface warships within Japan's territorial waters -->
<attachment name="conditionAttachment_Fleet_Invading_Japan_7in1" attachTo="Japan" javaClass="RulesAttachment" type="player">
        <!-- One originally owned sea zones -->
	<option name="enemyPresenceTerritories" value="original" count="1"/>
        <!-- 7 surface warships -->
        <option name="unitPresence" value="Destroyer:Cruiser:Battleship:Carrier:Carrier-Fleet" count="7"/>
</attachment>
<!-- Might also want to check for a split up fleet 3 in 2 -->
<attachment name="conditionAttachment_Fleet_Invading_Japan_3in2" attachTo="Japan" javaClass="RulesAttachment" type="player">
        <!-- Two originally owned sea zones -->
	<option name="enemyPresenceTerritories" value="original" count="2"/>
        <!-- 3 surface warships -->
        <option name="unitPresence" value="Destroyer:Cruiser:Battleship:Carrier:Carrier-Fleet" count="3"/>
</attachment>
<!-- Are fleets invading Japan -->
<attachment name="conditionAttachment_Fleets_Invading_Japan" attachTo="Japan" javaClass="RulesAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Fleet_Invading_Japan_7in1:conditionAttachment_Fleet_Invading_Japan_3in2"/>
         <option name="conditionType" value="OR"/>
</attachment>

Now that the 'when' is done, state development:

<!-- Japan Kamikaze-Plane -->
<attachment name="conditionAttachment_Japan_Kamikaze-Plane_Success" attachTo="Japan" javaClass="RulesAttachment" type="player">
	<option name="switch" value="false"/>
</attachment>
<attachment name="conditionAttachment_Japan_Kamikaze-Plane_Invert" attachTo="Japan" javaClass="RulesAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Japan_Kamikaze-Plane_Success"/>
	<option name="invert" value="true"/>
</attachment>
<attachment name="conditionAttachment_Japan_Research_Kamikaze-Plane" attachTo="Japan" javaClass="RulesAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Japan_Research_Kamikaze-Plane_Invert"/>
        <!-- The soonest development may start -->
	<option name="rounds" value="11-+"/>
</attachment>
<attachment name="triggerAttachment_Japan_Research_Kamikaze-Plane_Chance" attachTo="Japan" javaClass="TriggerAttachment" type="player">
        <!-- Research can start and stop depending on the following condition -->
	<option name="conditions" value="conditionAttachment_Fleets_Invading_Japan"/>
	<option name="conditions" value="conditionAttachment_Japan_Research_Kamikaze-Plane"/>
	<option name="chance" value="1:4"/>
	<option name="chanceIncrementOnFailure" value="1"/>
	<option name="playerAttachmentName" value="RulesAttachment" count="conditionAttachment_Japan_Kamikaze-Plane_Success"/>
	<option name="playerProperty" value="switch" count="true"/>
        <!-- The Emperor wants to give his fleets a chance to diminish the invading threat -->
	<option name="when" value="after:Japan:Combat"/>
</attachment>
<attachment name="triggerAttachment_Japan_Research_Kamikaze-Plane" attachTo="Japan" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Japan_Research_Kamikaze-Plane_Success"/>
	<option name="notification" value="Notify_Japan_Research_Kamikaze-Plane"/>
	<option name="players" value="$All-Players$"/>
	<option name="uses" value="1"/>
	<option name="when" value="before:JapanPurchase"/>
</attachment>
<!-- Add before Japan Production -->
<attachment name="triggerAttachment_Japan_Add_Kamikaze-Plane" attachTo="Japan" javaClass="TriggerAttachment" type="player">
        <!-- Only add if there is an invading fleet -->
	<option name="conditions" value="conditionAttachment_Fleets_Invading_Japan"/>
	<option name="conditions" value="conditionAttachment_Japan_Research_Kamikaze-Plane_Success"/>
	<option name="productionRule" value="production_Japan:buyKamikaze-Plane"/>
	<option name="when" value="before:JapanPurchase"/>
</attachment>
<!-- Alway remove the Kamikaze-Plane because conditions will merit when to purchase -->
<attachment name="triggerAttachment_Japan_Remove_Kamikaze-Plane" attachTo="Japan" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Japan_Research_Kamikaze-Plane_Success"/>
	<option name="productionRule" value="production_Japan:-buyKamikaze-Plane"/>
        <!-- can be done anytime before purchase -->
	<option name="when" value="after:JapanCombat"/>
</attachment>

Inf-Conscript is done in about the same way, but would use 'directOwnershipTerritories' and 'controlledNoWater'.

Cheers...

wc_sumpton

@TheDog, @Black_Elk

Using the new research, Germany's Submarine-Adv, and Submarine placements would look like:

<!-- Germany Player & AI Submarine  - these subs are free, but must have a Industry-Hvy in specific territory -->
<!-- Germany Submarine-Adv switches -->
<attachment name="conditionAttachment_Germany_Research_Submarine-Adv_Success" attachTo="Germany" javaClass="RulesAttachment" type="player">
	<option name="switch" value="false"/>
</attachment>

<attachment name="conditionAttachment_Germany_Research_Submarine-Adv_Invert" attachTo="Germany" javaClass="RulesAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Germany_Research_Submarine-Adv_Success"/>
	<option name="invert" value="true"/>	<!-- need to check the inverted condition -->
</attachment>

<!-- Check for Industry-Hvy in Hamburg-Lower Saxony -->
<attachment name="conditionAttachment_NationalTheme_Germany-2-Ham" attachTo="Germany" javaClass="RulesAttachment" type="player">
	<option name="directPresenceTerritories" value="Hamburg-Lower Saxony" count="1"/>
	<option name="unitPresence" value="Industry-Hvy" count="1"/>
	<option name="rounds" value="2-+"/>
</attachment>

<!-- Submarine placement chance -->
<attachment foreach="$SubmarineSZ$" name="triggerAttachment_Germany-2-Ham_@SubmarineSZ@" attachTo="Germany" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_NationalTheme_Germany-2-Ham"/>
	<option name="conditions" value="conditionAttachment_Germany_Research_Submarine-Adv_Invert"/> <!-- If true, Submarine-Adv research not completed -->
	<option name="placement" value="@SubmarineSZ@:Submarine" count="1"/>
	<option name="players" value="Germany"/>
	<option name="chance" value="1:10"/>
	<option name="when" value="after:GermanyEndTurn"/>
</attachment>
<!-- Submarine-Adv placement chance -->
<attachment foreach="$SubmarineSZ$" name="triggerAttachment_Germany-2Adv-Ham_@SubmarineSZ@" attachTo="Germany" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_NationalTheme_Germany-2-Ham"/>
	<option name="conditions" value="conditionAttachment_Germany_Research_Submarine-Adv_Success"/> <!-- If true, Submarine-Adv research completed -->
	<option name="placement" value="@SubmarineSZ@:Submarine-Adv" count="1"/>
	<option name="players" value="Germany"/>
	<option name="chance" value="1:10"/>
	<option name="when" value="after:GermanyEndTurn"/>
</attachment>

<attachment name="conditionAttachment_NationalTheme_Germany-2-Mec" attachTo="Germany" javaClass="RulesAttachment" type="player">
	<option name="directPresenceTerritories" value="Meckleburg" count="1"/>
	<option name="unitPresence" value="Industry-Hvy" count="1"/>
	<option name="rounds" value="2-+"/>
</attachment>
<attachment foreach="$SubmarineSZ$" name="triggerAttachment_Germany-2-Mec_@SubmarineSZ@" attachTo="Germany" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_NationalTheme_Germany-2-Mec"/>
	<option name="conditions" value="conditionAttachment_Germany_Research_Submarine-Adv_Invert"/>
	<option name="placement" value="@SubmarineSZ@:Submarine" count="1"/>
	<option name="players" value="Germany"/>
	<option name="chance" value="1:10"/>
	<option name="when" value="after:GermanyEndTurn"/>
</attachment>
<attachment foreach="$SubmarineSZ$" name="triggerAttachment_Germany-2Adv-Mec_@SubmarineSZ@" attachTo="Germany" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_NationalTheme_Germany-2-Mec"/>
	<option name="conditions" value="conditionAttachment_Germany_Research_Submarine-Adv_Success"/>
	<option name="placement" value="@SubmarineSZ@:Submarine-Adv" count="1"/>
	<option name="players" value="Germany"/>
	<option name="chance" value="1:10"/>
	<option name="when" value="after:GermanyEndTurn"/>
</attachment>

<attachment name="conditionAttachment_NationalTheme_Germany-2-Pom" attachTo="Germany" javaClass="RulesAttachment" type="player">
	<option name="directPresenceTerritories" value="Pomerania" count="1"/>
	<option name="unitPresence" value="Industry-Hvy" count="1"/>
	<option name="rounds" value="2-+"/>
</attachment>
<attachment foreach="$SubmarineSZ$" name="triggerAttachment_Germany-2-Pom_@SubmarineSZ@" attachTo="Germany" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_NationalTheme_Germany-2-Pom"/>
	<option name="conditions" value="conditionAttachment_Germany_Research_Submarine-Adv_Invert"/>
	<option name="placement" value="@SubmarineSZ@:Submarine" count="1"/>
	<option name="players" value="Germany"/>
	<option name="chance" value="1:10"/>
	<option name="when" value="after:GermanyEndTurn"/>
</attachment>
<attachment foreach="$SubmarineSZ$" name="triggerAttachment_Germany-2Adv-Pom_@SubmarineSZ@" attachTo="Germany" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_NationalTheme_Germany-2-Pom"/>
	<option name="conditions" value="conditionAttachment_Germany_Research_Submarine-Adv_Success"/>
	<option name="placement" value="@SubmarineSZ@:Submarine-Adv" count="1"/>
	<option name="players" value="Germany"/>
	<option name="chance" value="1:10"/>
	<option name="when" value="after:GermanyEndTurn"/>
</attachment>

<attachment name="conditionAttachment_NationalTheme_Germany-2-Kon" attachTo="Germany" javaClass="RulesAttachment" type="player">
	<option name="directPresenceTerritories" value="Konigsberg-E.Prussia" count="1"/>
	<option name="unitPresence" value="Industry-Hvy" count="1"/>
	<option name="rounds" value="2-+"/>
</attachment>
<attachment foreach="$SubmarineSZ$" name="triggerAttachment_Germany-2-Kon_@SubmarineSZ@" attachTo="Germany" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_NationalTheme_Germany-2-Kon"/>
	<option name="conditions" value="conditionAttachment_Germany_Research_Submarine-Adv_Invert"/>
	<option name="placement" value="@SubmarineSZ@:Submarine" count="1"/>
	<option name="players" value="Germany"/>
	<option name="chance" value="1:10"/>
	<option name="when" value="after:GermanyEndTurn"/>
</attachment>
<attachment foreach="$SubmarineSZ$" name="triggerAttachment_Germany-2Adv-Kon_@SubmarineSZ@" attachTo="Germany" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_NationalTheme_Germany-2-Kon"/>
	<option name="conditions" value="conditionAttachment_Germany_Research_Submarine-Adv_Success"/>
	<option name="placement" value="@SubmarineSZ@:Submarine-Adv" count="1"/>
	<option name="players" value="Germany"/>
	<option name="chance" value="1:10"/>
	<option name="when" value="after:GermanyEndTurn"/>
</attachment>
<!-- END Player & AI these subs are free, but must have a Industry-Hvy in specific territory -->

Research

<!-- Submarine-Adv switches moved to Submarine placement chance -->
<!-- Without successful research, setup when to begin -->
<attachment name="conditionAttachment_Germany_Research_Submarine-Adv" attachTo="Germany" javaClass="RulesAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Germany_Research_Submarine-Adv_Invert"/>
	<option name="rounds" value="7-+"/>	<!-- 7 Research begins on round 7, and continues untill successful -->
</attachment>

<!-- Using chance to research -->
<attachment name="triggerAttachment_Germany_Research_Submarine-Adv_Chance" attachTo="Germany" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Germany_Research_Submarine-Adv"/>
	<option name="chance" value="1:4"/> <!-- Acts like a Tech roll -->
	<option name="chanceIncrementOnFailure" value="1"/> <!-- Increasing chance on next turn -->
	<option name="playerAttachmentName" value="RulesAttachment" count="conditionAttachment_Germany_Research_Submarine-Adv_Success"/>
	<option name="playerProperty" value="switch" count="true"/>	<!-- If successful change success switch to true -->
	<option name="when" value="before:GermanyCombatMove"/>
</attachment>

<attachment name="triggerAttachment_Germany_Research_Submarine-Adv" attachTo="Germany" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Germany_Research_Submarine-Adv_Success"/>
	<option name="productionRule" value="production_Germany:buySubmarine-Adv"/>	
	<option name="productionRule" value="production_Germany:-buySubmarine"/> 		<!-- replaced by Submarine-Adv -->
	<option name="notification" value="Notify_Germany_Research_Submarine-Adv"/>
	<option name="players" value="$All-Players$"/>
	<option name="uses" value="1"/> <!-- only do this once -->
	<option name="when" value="before:GermanyPurchase"/>
</attachment>

Cheers...

wc_sumpton

@TheDog, @Black_Elk

Using the new research, I have been backing up the chance to start the research by one round. Because Germany's Armor-Hvy started on round 2, backing up to round 1 means that there is no check on when to begin the research:

<!-- Germany Armor-Hvy -->
<attachment name="conditionAttachment_Germany_Research_Armor-Hvy_Success" attachTo="Germany" javaClass="RulesAttachment" type="player">
	<option name="switch" value="false"/>
</attachment>

<attachment name="conditionAttachment_Germany_Research_Armor-Hvy_Invert" attachTo="Germany" javaClass="RulesAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Germany_Research_Armor-Hvy_Success"/>
	<option name="invert" value="true"/>	<!-- need to check the inverted condition -->
</attachment>

<!-- Using chance to research no round check since research begins on round 1 -->
<attachment name="triggerAttachment_Germany_Research_Armor-Hvy_Chance" attachTo="Germany" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Germany_Research_Armor-Hvy_Invert"/> <!-- This tell when to start and stop the research -->
	<option name="chance" value="1:4"/> <!-- Acts like a Tech roll -->
	<option name="chanceIncrementOnFailure" value="1"/> <!-- Increasing chance on next turn -->
	<option name="playerAttachmentName" value="RulesAttachment" count="conditionAttachment_Germany_Research_Armor-Hvy_Success"/>
	<option name="playerProperty" value="switch" count="true"/>	<!-- If successful change success switch to true -->
	<option name="when" value="before:GermanyCombatMove"/>
</attachment>

<attachment name="triggerAttachment_Germany_Research_Armor-Hvy" attachTo="Germany" javaClass="TriggerAttachment" type="player">
	<option name="conditions" value="conditionAttachment_Germany_Research_Armor-Hvy_Success"/>
	<option name="productionRule" value="production_Germany:buyArmor-Hvy"/>	
	<option name="productionRule" value="production_Germany:-buyArmor-Lgt"/> 		<!-- replaced by Armor-Hvy -->
	<option name="notification" value="Notify_Germany_Research_Armor-Hvy"/>
	<option name="players" value="$All-Players$"/>
	<option name="uses" value="1"/> <!-- only do this once -->
	<option name="when" value="before:GermanyPurchase"/>
</attachment>

Thus less code, and easier to debug!!

Cheers...

wc_sumpton

@TheDog, @Black_Elk

Question about order of battle. On the European side Germany goes first, as the major aggressor, this is good. Which is followed by USSR, and the British, with Italy stuck between them as support for Germany.

On the Pacific side, China goes first, forcing Japan, which should be the Pacific's side major aggressor, to defending and countering. Japan should go first. China can do very little to aid USA or the Pacific-Allies. So even if it looks lopsided, 3 allied players going together, I think it plays out fairer for the Japanese.

Sometime, while testing and playing as the 'British', I receive the notice: "Britain and their allies are close to victory what shall we do?" on the first turn.

Just some thoughts.

Cheers...

Black_Elk

OK so I threw this together for the territories that have a terrain effect going on. I reduced the icons to 36px so they would display around the size of the VC star. Just tried to keep them all sorta near the top of the tiles, trying to dance around the current place and pu_place where I could. It's not prescriptive, I just put down what was already there so it would be easier to parse at a glance. I did these on a separate layer so it would be easier to make adjustments or substitutions.

Here they are isolated on a transparency layer at the same dimensions as the map, but just by themselves...

https://www.dropbox.com/s/xqab13jcimkuf0y/terrain_icon36px_layer.png?dl=0

Here they are added to the relief...

https://www.dropbox.com/s/x4doyrbu047y0mx/relief_map_sz_bw_with_terrain_icons.png?dl=0

Looks like this...

To move em around you can just cut/paste and drag, then merge the layer with the relief image. For a visual, this would probably be cool to have as toggle where the player can option them on/off via a skin. Probably would make sense to display the pu_place directly below them or something along those lines, but just wanted to get stuff laid down.

Couple thoughts suggestions... Right now there are some gaps (Eastern Front, Coastal France, North Africa, Central Asia etc) where there are only a couple TTs that have terrain effect, and other regions (Central Europe, the Americas, West Africa, Southeast Asia etc) where there are many terrain effect TTs concentrated together. Might make sense to add a few more to kinda fill out those areas. Some effects like Marsh and Desert have only a few active tiles, others like Forest, Urban have many tiles. I think you could add some desert spots for the Gobi and many tiles in the Mid-East or North Africa. Marsh is more complicated cause the effect is very extreme, but probably anywhere at a low elevation with a river mouth flood plane could work maybe? Perhaps some of the jungle/forest spots you have might get switched out for marsh for variety. Urban is probably the most abstract, and there are quite a few, so that might be another way to mix it up. Right now they seem to be pretty much everywhere that starts with an Industry-Hvy, though I did spot a couple exceptions. For neutral TTs there are some regions that have a quite a few, but I think these tiles would be mostly inactive so might be worth considering how they are distributed. I think for a neutral TT to enter play, that'd be fine, but there's not much incentive if the TTs have no or low values. I don't know how the terrain effects play with just the bunkers (no standing army to complement them), but if there's a malus to the attacker that's a pretty strong disincentive. With large enough armies during the endgame even 9 bunkers could probably be overcome, like if players are cruising around with 20 tanks or whatever hehe. I'd say for neutrals, if we want them in play, might make sense to fiddle with the forces/PU values or some areas. I've seen the AI go after them on occasion, though pretty rarely, which seems fine, but some spots are much more attractive. like Konduz, since they can open up a front. So might make sense to add something there. Another option might be to just give every tile a terrain effect, though in that case I'd maybe consider dialing down the effect to be less pronounced. I still think movement restrictions have a much greater impact than att/def adjustments by unit type. As I recall, Forest was the default initially, so there might be some holdovers there? Many of the pacific islands have forest in the current. I wasn't sure, so just put down everything I saw that was there. I figure it'd be easier to swap or delete where needed once you got a visual going.

Oh and here are the icons shrunk down to 36.

I agree about the Japanese turn order. I would say switching the position of Pacific Allies and China in the turn order sequence would probably be the best approach. Even if it messes up the current balance. Having USSR control Pacific Allies and USA control China I think would be largely similar. It would probably be more entertaining for the USSR player as well, since then they could have a little naval play going on during their turn block. Pacific Allies would present a different challenge for the team, but they would be more useful in a can opening role with that sort of sequence.

Oh one last thing I caught, there is a land connection between Corregidor and Manila-Luzon in the current which probably should be removed for consistency with other spots in the neighborhood.

Anyhow, hopefully it helps. Let me know if I missed anything, or if you want to make a tweak somewhere.

Catch ya next round!

wc_sumpton

@TheDog, @Black_Elk

This is a static Anti-Aircraft gun:

But the code indicates that it can move 2 spaces, and be used on offence. Saying that a crew can pack-up, carry farther then they can move unburden, set it up and fire!! Give every infantry crew one to carry!! LoL

Just some laughter!!

Cheers...

TheDog

@wc_sumpton
That took longer than expected, 8 hours plus to convert the tech, have conscripts etc.
Seriously though its my ideal form of tech advancement.

Now for testing.

Also changed the nation turn order, swapped China and Pacific-Allies.

wc_sumpton said
I receive the notice: "Britain and their allies are close to victory what shall we do?" on the first turn.
You probably took Benghazi, this notification is because we have starting VCs of
19 Allied VC
10 Axis VC
with warnings of impending victory at 20 VC and
Total Victory at 21 VC

Its a known issue, because I wanted to keep the Total Victory the same for both sides and as low as possible. Ideally we should remove 1 Allied VC ?

.
Territory Terrain @Black_Elk
Yes the starting default terrain was forest, it should have been blank/none.

Defining a territories terrain is difficult as it should be 51%+ of that TT terrain or have a significant feature like a capital/Industrial area/Built up Area making it Urban, in short it is very subjective, so I'm happy to make changes, especially if you are from/visited that country.

I will add your terrain reliefTile.png as a Map skin then players can swap between the current and the new one with a mouse click, in the next release. So if you want to change it, do it soon.

Connection between Corregidor and Manila-Luzon removed.

TheDog

@wc_sumpton
Re AA gun, for an American your humour is very British.

The AA move 2, was before I decided to have Railways, move 3, linked to Industry. My thinking was that AA requires a prime mover so 2 seems fair, once placed they rarely move and it was also an attempt to the AI to buy them, as they have to 5pu+ so they are not classed as fodder by the AI. Even so, the AI still does not buy them.