Proposal: Always-shown "Purchased Units" panel

Cernel

@LaFayette said in Proposal: Always-shown "Purchased Units" panel:

While they were not 'purchased', they were 'added to the purchase' and are part of the 'placements'. To another extent, the terminology just needs to work well enough so it's easily understood. Inventing brand new terminology is not a good way to go.

"Placements" I think is maybe the best contender. "Purchase" is a good alternative too, the current is worse than either of those as it's wordy and assumes that all purchases or placements are units (not the case, so it's even worse than the scenario where a unit is granted).

Well, I already explained my point of view, but, if we talk about being true to existing terminology, in the moment we have a purchase phase (<delegate name="purchase" javaClass="games.strategy.triplea.delegate.PurchaseDelegate" display="Purchase Units"/>), purchased units can obviously only mean units you got into your inventory by purchasing them in the course of a purchase phase. Since in TripleA you can even have games without any purchase phases at all, units you have in your inventory should not be called "purchased", as that would be wrongly assuming that you can have units in your inventory only if they have been put in there in the course of a purchase phase.

For example, if TripleA would have Risk, wouldn't it be wrong to see those units you got (without any purchase phases) identified as "Purchased Units"?

No idea if maybe "held" or "to be placed" may sound better than "to place", as English is not my native language.

Also, from the name of the property "Unplaced units live when not placed" I understand that all units you have in your inventory are considered "unplaced units", not only those you already retained in it during the course of a placement phase, otherwise the property should have been named simply "Unplaced units live" (instead of "live", I would actually say something like "are kept in inventory").

LaFayette

Good point on the different contexts, in light of that suggestion I would lean towards the "placements" suggestion I made earlier. What are "units-to-place" other than "placements?" I think it's a more direct name for the same.

At this particular moment though we probably should put a pin in the naming and agree if the feature is ready to move beyond beta-testing, or if there any problems with the latest that must be fixed first.

On a larger scale, the next set of fixes/problems I think are probably with the unit scroller, for now we should focus on this new feature to be sure it's ready.

Cernel

@LaFayette I think "Placements" would be very unclear, and actually makes me think you are referring to your placement actions.

Strict pos2 terminology for what at this feature would be "Units held in the inventory".

Alexei Svitkine

Other ideas:

"Reinforcements"
"Produced"

prastle

@Alexei-Svitkine Produced Units or maybe Produced Reinforcements. Both terms help explain the other but perhaps to long? Either way if two words can be used Produced Units is probably the most correct. Any thoughts here @redrum ?

redrum

@prastle honestly most of the suggestions are fine IMO. "Units to place" is pretty accurate and covers all the various situations. Purchases or purchases units is probably fine as well even though you can have triggered or free units to place as well.

Cernel

@redrum said in Proposal: Always-shown "Purchased Units" panel:

Purchases or purchases units is probably fine as well even though you can have triggered or free units to place as well.

I already said it, but (even if all units to be placed would be always purchased) the other wrong item for any such terms is the fact that now that panel has also taken over what was called the "Units left to place:" insert, listed before any "Placements", in the "Actions" panel, during placement. If you would call this new panel something like "Purchased Units", that would make no sense with the fact that, during placement, you would see those units progressively decreasing in number, the more you place them. During placement, you would, then, see in the action tab that you have, for example, 5 placed units and 5 purchased units, and what you should understand, from that, is that you placed all your purchased units, not only half of them!

The problem of wrongly assuming all units in the inventory must have been purchased can be circumvented by calling those units, for example, "Produced Units", instead of "Purchased Units", or whatever that is at least not clearly referring to some specific actions or phases, but this would not address this second problem I mentioned.

Cernel

@redrum said in Proposal: Always-shown "Purchased Units" panel:

@prastle honestly most of the suggestions are fine IMO. "Units to place" is pretty accurate and covers all the various situations.

To be clearer, it should be "Units to place" when you are not in the placement phase and "Units left to place" or "Remaining units to place" when you are.

Cernel

Some decent options, from my point of view, with what is in between parentheses meant to be present during placement, but not otherwise:
"Units (left) to place"
"Units waiting for placement"
"Units in inventory"
"Held units"
"Units held in inventory"
"Units (left) to mobilize"
"Unplaced units"
"Units under production"

Cernel

@Cernel A visual example of what I said:

What would you understand, if that panel called "Units to Place" would be, instead, called "Purchased Units"? What I would understand is that I purchased 4 units and placed all of them, while, instead, I purchased 8 units, and placed half of them.

prastle

@Cernel gd point cer

LaFayette

Let's put a hold on the naming discussion, there are more important elements to consider for right now. Keep the big picture in mind guys.

LaFayette

We need feedback if this feature is ready to go out from behind the 'beta' testing flag and if there are any other mechanical problems that should be fixed. I suspect this is ready for prime time and then we can discuss the finer details.

Cernel

I'm playing with the new stuff, and, sorry, but, maybe it's the abit, but I'm so irritated by the fact that the "Units to Place" during placement now is at the bottom. Previously, you would have seen the units left to place right at the top, and this felt much better. Now, each time I go to placement I feel like I have no units to place (and sometimes for a moment I wonder I didn't purchase anything), then I recall that now I have to look at the bottom, and then again upwards as the actions are made.

Though the fact that I have been used to see them there may be the main reason why I feel I need them there. Not sure if I can get eventually used to this new disposition and I'm curious if anybody else is bothered.

Also, I have to say I virtually never look at this panel, but, right now, I'm playtesting a 270BC mod against myself, so it's not a very busy game.

Hepps

@Cernel Looks as though you bought 8 and had placed 4 so far.

As long as the count goes down while you are actually placing units during the placement the name seems fine.

Frostion

I have tested out this feature and here are my thoughts (copied over from another thread )

It it OK if this unplaced unit information is shown throughout the players steps and other phases than placement. But when the player has his placement phase, I feel very annoyed having to look down in the buttom right corner of the screen to see what I still need to place. On this tab/during this step I would prefer unplaced unit be displayed where it used to, above already finished placements. The reason is, that unplaced units are during this step the most important info and player eyes would like it to be near minimap, "done" buttons. Anyone else have experiences, feelings and opinions on this?

I think @Cernel feels the same.

LaFayette

Bump on this topic:

consideration to move this to the top of the action bar during place units
consideration to rename the text 'placements'. I know it does not 100% match, but IMO it's better to have something that 95% matches and uses words that people would want to use. I certainly call this panel the "placements panel", and not the "units to place panel", which strikes me as very annoyingly wordy

Cernel

@LaFayette said in Proposal: Always-shown "Purchased Units" panel:

consideration to rename the text 'placements'. I know it does not 100% match, but IMO it's better to have something that 95% matches and uses words that people would want to use. I certainly call this panel the "placements panel", and not the "units to place panel", which strikes me as very annoyingly wordy

I don't like "placements", as that is already used to define the "place on gameboard" actions you made. I gave a set of alternatives to "units to place", despite the fact that I believe that name is good:

@Cernel said in Proposal: Always-shown "Purchased Units" panel:

Some decent options, from my point of view, with what is in between parentheses meant to be present during placement, but not otherwise:
"Units (left) to place"
"Units waiting for placement"
"Units in inventory"
"Held units"
"Units held in inventory"
"Units (left) to mobilize"
"Unplaced units"
"Units under production"

Of course, the "units" part can be omitted. For example, the box can be just called "Under Production".

simon33

In 1.9 it has "Units left to place:". Seems fine to me. Clear and unambiguous. I never thought it was annoyingly wordy. I suppose above that it has "Italians place" as a heading. Done button is between.

If it isn't broke...

Frostion

I will be pretty strange if it is to shuffle between top and buttom, depending on if it is placement phase or not. I hope this is not the case.

If this is the case, I would suggest an alternative solution. Have the current display method in right sidebar only show during the player's purchase/place phase (at top ofcours). Pursue the mini-icons implementation bellow the mini map and have one of them be "Unplaced Units" (I can make the icon) This icon could open up an informing window containing unplaced units, if there are any and the player wants to look at them out of the purchase/placement phase. It could be greyed out, blank or something if there are no units. Or a pop-up saying this.

BTW: I think the terms "Unplaced Units" is the most precise and short, if there is a need to change the term. I feel that the word "Placements" more refers to the acts done when placing or the areas/points where placements have already been done.